It only takes one click of an "on" switch to start your own grain mill.

The grain mill is a robust mill with an aluminum hopper that can take up to 4L of grains at a time. If you need to fit more grains in the hopper than this, you can easily build your own hopper extension. Instead of using oil-impregnated bronze bushings, it has an alloy block frame that contains two rollers on actual stainless steel ball bearings. It is possible to rotate the mill in either a clockwise or counterclockwise direction because the drive shaft and all axles are built into the roller. A 2.5mm adjustable range for gap separation is provided by stainless steel knurled knobs. Simply loosen the adjustment screws, adjust the gap, and then tighten the adjustment screws to make adjustments.

Features:

• The durable grain mill has an aluminum hopper that can accommodate up to 4 kg of grains at once.
• Advanced 2-roller grinding produces more even and smooth products. Range of adjustment: 0-0.065ON. Size of roller: 6" in diameter (15x3.8cm diamter)
• For the roller, genuine bearings are used rather than brass bushings. Real ball bearings increase the mill's lifespan while also improving the effectiveness of the entire grinding operation.
• This well-crafted, precisely machined mill is simple to set up and operate. The enormous grain bills may be crushed quickly and easily with just a 60w gear motor running at 75 RPM, giving you a crushing rate of 20kg (44 pounds) per hour.

Specifications: